Check the batteries (rechargeable) Try charging the device. It may take an hour or more to fully charge your device. See the documentation that is included with the device. Notes • The software may provide low battery warnings. However, the battery status may not be accurate if a wireless connection problem exists. If you still receive warnings after replacing the batteries, continue with the other solutions provided in this article. • Some rechargeable batteries may also need to be replaced.

For information about the batteries, see the documentation that is included with the device. Check the batteries (non-rechargeable) • Make sure that you have installed the correct type of batteries in the device. For information about the batteries, see the documentation that was included with the device. • Replace all the batteries with new batteries.

Reset the power to the device • If your device has a power switch, turn the device off. • If your device has removable batteries, remove the batteries and reinstall them. Make sure that they are positioned correctly.

• If your device has a power switch, turn the device on. Check for software updates. Unplug and re-plug the transceiver. • Unplug the wireless transceiver and then plug it in again. • If the wireless transceiver is plugged into a USB hub, unplug the hub and then plug it in again.

I have a microsoft bluetooth keyboard and cant install it how do i find bluetooth on. Install bluetooth keyboard. Such as keyboard, mouse.

Connect the wireless transceiver to another port on the same computer. • If you have multiple USB ports, plug the wireless transceiver into a different USB port on the same computer.

• If the wireless transceiver is plugged into a USB hub: • Plug the hub into a different USB port on the same computer. • Make sure that you are using a powered hub that is appropriate for high-powered USB devices. • Try plugging the wireless transceiver directly into a USB port on the computer. Refresh the wireless connection. Check the placement of the wireless device. The wireless transceiver and device must be situated correctly.

Try the following solutions: • Place the wireless device closer to the wireless transceiver. • If you have a mouse and keyboard and they are both wireless, place them at an equal distance from the transceiver. • Turn the transceiver on its side or upside down. Some wireless and non-wireless objects can cause interference with your wireless device. To prevent transceiver interference, avoid using your device near objects such as: • Wireless networking devices • Cordless and cellular telephones • Remote control toys • Microwave ovens • Cables running parallel to the wireless transceiver cables • Metallic surfaces in contact with the device • Other wireless pointing devices and transceivers Setting up a Bluetooth device. • Make sure Bluetooth is on. If you are connecting your device by using an internal Bluetooth connection, make sure wireless connections are active.

Many portable computers have a switch, a key, or a keyboard shortcut that activates the wireless connections. • Turn on Bluetooth on your computer if your mouse does not have its own transceiver. If your mouse does not include its own transceiver, your desktop, notebook, or portable computer must have a transceiver built into the computer or you must use a non-Microsoft external transceiver. How the mouse will connect to the computer by Bluetooth, and how to turn on Bluetooth, varies depending on how it is implemented on the computer.

You may have to contact the computer manufacturer or the manufacturer of the Bluetooth transceiver to find out how to turn on Bluetooth on the computer and how to add a device to it. Refresh the wireless connection to your Bluetooth device. • Pair your Bluetooth device to your computer. • Re-establish a wireless link if your computer does not detect a Bluetooth-enabled Microsoft device If you try to use a Bluetooth-enabled Microsoft wireless keyboard or mouse and the input device does not work, it may be because your computer does not detect the device.

Install The Mdt Extensions For Configuration Manager on this page. To resolve this issue on a Windows computer, re-establish the wireless link with the computer. For more information, see Microsoft Support article 811798 at Resolve a connection failure when the setup software cannot connect to a Bluetooth-enabled Microsoft device. If the Bluetooth connection cannot be established, you may have to remove the unresponsive device from the system and then add it back. • On your computer, open the Bluetooth program. The Bluetooth program is usually found either in Control Panel or the Settings app. • If the unresponsive Bluetooth device is listed, select it and then click Remove device.

• To reconnect the device to your computer, press and hold the Connect button on the underside of the device for a few seconds. When the light on top of the device blinks red and green, the device is discoverable to other Bluetooth devices for 2 minutes. • When the device is listed, select it, and follow the instructions to successfully connect the device. Why there is a delay before a Bluetooth mouse responds after it has been inactive. Bluetooth wireless technology lets you connect multiple compliant devices to your computer. You may be able to use other Bluetooth devices with the Microsoft Wireless Transceiver for Bluetooth, but this connectivity is not always supported by Microsoft.

For information about how to use other Bluetooth devices with the Microsoft Wireless Transceiver for Bluetooth, see the documentation that was included with the device. For newer devices, download the latest version of the software from the Hardware Download Software Web page. Connecting the Wedge Mobile Keyboard to a tablet PC. • Press and hold the Fn key at the same time as you press and hold the Connect button located under the keyboard.

After 3 to 5 seconds, a small light on the top of the keyboard will blink green and red alternately. This means that your keyboard is discoverable to your tablet within 6 minutes. • On your tablet PC, from the Start menu, select Control Panel, and in Category view, locate Hardware and Sound. • Select Add a device. • When the keyboard is listed, select it, and follow the instructions to successfully pair your Wedge Keyboard with your tablet.

Note If you want to pair your keyboard with a tablet or other computer that supports SSP with a passkey, press and hold the Connect button only. Bluetooth Disconnection issue. If you are attempting to launch the calculator using your keyboards built in key, and the calculator either fails to launch, or launches behind other applications, it is likely an indication that your Mouse and Keyboard Center Software is not up to date. You can get the latest update by going. From this list identify your keyboard from the list, or search for it in the search bar.

Once you have identified your keyboard, tap or click on it to go to the available downloads page. Under 'Software and Drivers', click on the available update, and follow the onscreen instructions.

Logitech Cordless Keyboard-Mouse LOGITECH CORDLESS MOUSE & KEYBOARD INSTRUCTIONS Note: These instructions also apply to some Dell cordless keyboards and mice that are sourced from Logitech. (They will be so marked.) BATTERIES 1) The Logitech Cordless Mouse & Cordless Optical Mouse both use “ AAA” size batteries (1.5 volts). [This is subject to change without notice.] 2) The Logitech Cordless Keyboard uses two “ AA” size (penlight) batteries (also 1.5 volts). [This is subject to change without notice.] 3) Be careful when inserting the batteries that you put them in correctly.

It is very easy to put them in so that the positive (+) end of the battery is in the negative side ( - ) or vice versa. 4) Be sure to check the batteries periodically with a Battery Checker. You can buy an inexpensive Battery Checker at Radio Shack or at some computer stores that tells you whether the battery is “ OK” or if it’s time to “ Replace” them. Check the batteries before you put them in to be sure you aren’t putting in old batteries if they are not coming straight from the box. 5) The batteries normally last about 4 to 6 months with the Logitech Cordless Mouse, and about 2 months with the Logitech Cordless Optical Mouse (the one with the red laser in it and no ball).

You should see a window pop up on the screen pop with a warning when the batteries are low. CONNECTING 1) Push the Connect button on the Receiver (that box that looks like a dark gray pack of cigarettes located on the right side of the monitor). 2) Press the Connect button on the underside of the mouse. 3) Likewise, turn the keyboard over and press the Connect button on the underside of the keyboard. Note: Some Logitech keyboards have the Connect button on the right side. 4) You will then see a small window pop up in the center of your screen indicating that you are attempting to connect the cordless devices together. 5) Click on the Close or Cancel button to get rid of the small window.

DISTANCE 1) Keep the distance between the Receiver and the Mouse at about 8 to 12 inches. (The maximum distance they can be separated is about 6 feet, but the mouse will usually work better at 8 to 12 inches.) 2) Keep the distance between the Receiver and the Keyboard at about 8 to 12 inches, too.